Difference between revisions of "Running gem5"
m (Typo edit.)
|Line 42:||Line 42:|
The default options that gem5 uses to run can be set by creating an <code>~/.m5/options.py</code> file and placing options that you are interested in there. For example, if you would
The default options that gem5 uses to run can be set by creating an <code>~/.m5/options.py</code> file and placing options that you are interested in there. For example, if you would like to always redirect standard error and out to a file you could add: <code>options.stdout_file=simout</code> to <code>options.py</code>.
== Script Options ==
== Script Options ==
Revision as of 16:52, 1 April 2013
The gem5 command line has four parts, the gem5 binary, options for the binary, a simulation script, and options for the script. The options that are passed to the gem5 binary and those passed to the script are handled separately, so be sure any options you use are being passed to the right component.
% <gem5 binary> [gem5 options] <simulation script> [script options]
Running gem5 with the "-h" flag prints a help message that includes all of the supported simulator options. Here's a snippet:
% build/ALPHA/gem5.debug -h Usage ===== gem5.debug [gem5 options] script.py [script options] Copyright (c) 2001-2008 The Regents of The University of Michigan All Rights Reserved gem5 is copyrighted software; use the --copyright option for details. Options ======= --version show program's version number and exit --help, -h show this help message and exit --build-info, -B Show build information --copyright, -C Show full copyright information --readme, -R Show the readme --outdir=DIR, -d DIR Set the output directory to DIR [Default: m5out] --redirect-stdout, -r Redirect stdout (& stderr, without -e) to file --redirect-stderr, -e Redirect stderr to file --stdout-file=FILE Filename for -r redirection [Default: simout] --stderr-file=FILE Filename for -e redirection [Default: simerr] --interactive, -i Invoke the interactive interpreter after running the script --pdb Invoke the python debugger before running the script --path=PATH[:PATH], -p PATH[:PATH] Prepend PATH to the system path when invoking the script --quiet, -q Reduce verbosity ...
The default options that gem5 uses to run can be set by creating an
~/.m5/options.py file and placing options that you are interested in there. For example, if you would like to always redirect standard error and out to a file you could add:
The script section of the command line begins with a path to your script file and includes any options that you'd like to pass to that script. Most Example scripts allow you to pass a '-h' or '--help' flag to the script to see script specific options. An example is as follows:
gem5 compiled Apr 2 2011 00:57:11 gem5 started Apr 3 2011 21:16:02 gem5 executing on zooks command line: build/ALPHA/gem5.opt configs/example/se.py -h Usage: se.py [options] Options: -h, --help show this help message and exit -c CMD, --cmd=CMD The binary to run in syscall emulation mode. -o OPTIONS, --options=OPTIONS The options to pass to the binary, use " " around the entire string -i INPUT, --input=INPUT Read stdin from a file. --output=OUTPUT Redirect stdout to a file. --errout=ERROUT Redirect stderr to a file. --ruby -d, --detailed -t, --timing --inorder -n NUM_CPUS, --num-cpus=NUM_CPUS --caches --l2cache --fastmem --clock=CLOCK --num-dirs=NUM_DIRS --num-l2caches=NUM_L2CACHES --num-l3caches=NUM_L3CACHES --l1d_size=L1D_SIZE --l1i_size=L1I_SIZE --l2_size=L2_SIZE --l3_size=L3_SIZE --l1d_assoc=L1D_ASSOC --l1i_assoc=L1I_ASSOC --l2_assoc=L2_ASSOC --l3_assoc=L3_ASSOC ...
Full System (FS) Mode
We'll assume that you've already built an ALPHA version of the gem5 simulator, and downloaded and installed the full-system binary and disk image files. Then you can just run the fs.py configuration file in the gem5/configs/examples directory. For example:
% build/ALPHA/gem5.debug -d /tmp/output configs/example/fs.py gem5 Simulator System Copyright (c) 2001-2006 The Regents of The University of Michigan All Rights Reserved gem5 compiled Aug 16 2006 18:51:57 gem5 started Wed Aug 16 21:53:38 2006 gem5 executing on zeep command line: ./build/ALPHA/gem5.debug configs/example/fs.py 0: system.tsunami.io.rtc: Real-time clock set to Sun Jan 1 00:00:00 2006 Listening for console connection on port 3456 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000 warn: Entering event queue @ 0. Starting simulation... <...simulation continues...>
By default, the fs.py script boots Linux and starts a shell on the system console. To keep console traffic separate from simulator input and output, this simulated console is associated with a TCP port. To interact with the console, you must connect to the port using a program such as
telnet, for example:
% telnet localhost 3456
Telnet's echo behavior doesn't work well with gem5, so if you are using the console regularly, you probably want to use M5term instead of telnet. By default gem5 will try to use port 3456, as in the example above. However, if that port is already in use, it will increment the port number until it finds a free one. The actual port number used is printed in the gem5 output.
In addition to loading a Linux kernel, gem5 mounts one or more disk images for its filesystems. At least one disk image must be mounted as the root filesystem. Any application binaries that you want to run must be present on these disk images. To begin running benchmarks without requiring an interactive shell session, gem5 can load .rcS files that replace the normal Linux boot scripts to directly execute from after booting the OS. These .rcS files can be used to configure ethernet interfaces, execute special gem5 instructions, or begin executing a binary on the disk image. The pointers for the linux binary, disk images, and .rcS files are all set in the simulation script. (To see how these files work, see Simulation Scripts Explained.) Examples: Going into / of root filesystem and typing ls will show:
benchmarks etc lib mnt sbin usr bin floppy lost+found modules sys var dev home man proc tmp z
Snippet of an .rcS file:
echo -n "setting up network..." /sbin/ifconfig eth0 192.168.0.10 txqueuelen 1000 /sbin/ifconfig lo 127.0.0.1 echo -n "running surge client..." /bin/bash -c "cd /benchmarks/surge && ./Surge 2 100 1 192.168.0.1 5. echo -n "halting machine" m5 exit
The m5term program allows the user to connect to the simulated console interface that full-system gem5 provides. Simply change into the util/term directory and build m5term:
% cd gem5/util/term % make gcc -o m5term term.c % make install sudo install -o root -m 555 m5term /usr/local/bin
The usage of m5term is:
./m5term <host> <port> <host> is the host that is running gem5 <port> is the console port to connect to. gem5 defaults to using port 3456, but if the port is used, it will try the next higher port until it finds one available. If there are multiple systems running within one simulation, there will be a console for each one. (The first system's console will be on 3456 and the second on 3457 for example) m5term uses '~' as an escape character. If you enter the escape character followed by a '.', the m5term program will exit.
m5term can be used to interactively work with the simulator, though users must often set various terminal settings to get things to work
A slightly shortened example of m5term in action:
% m5term localhost 3456 ==== m5 slave console: Console 0 ==== M5 console Got Configuration 127 memsize 8000000 pages 4000 First free page after ROM 0xFFFFFC0000018000 HWRPB 0xFFFFFC0000018000 l1pt 0xFFFFFC0000040000 l2pt 0xFFFFFC0000042000 l3pt_rpb 0xFFFFFC0000044000 l3pt_kernel 0xFFFFFC0000048000 l2reserv 0xFFFFFC0000046000 CPU Clock at 2000 MHz IntrClockFrequency=1024 Booting with 1 processor(s) ... ... VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 480k freed init started: BusyBox v1.00-rc2 (2004.11.18-16:22+0000) multi-call binary PTXdist-0.7.0 (2004-11-18T11:23:40-0500) mounting filesystems... EXT2-fs warning: checktime reached, running e2fsck is recommended loading script... Script from M5 readfile is empty, starting bash shell... # ls benchmarks etc lib mnt sbin usr bin floppy lost+found modules sys var dev home man proc tmp z #
Full System Benchmarks
We have several full-system benchmarks already up and running. The binaries are available in the disk images you can obtain/download from us, and the .rcS files are in the gem5/configs/boot/ directory. To run any of them, you merely need to set the benchmark option to the name of the test you want to run. For example:
%./build/ALPHA/gem5.opt configs/example/fs.py -b NetperfMaerts
To see a comprehensive list of all benchmarks available:
%./build/ALPHA/gem5.opt configs/examples/fs.py -h